LED kits

Displaying 1 to 16 (of 16 products)

Product Image	Product Name+	Price
	18 pin microcontroller RGB LED kit This kit has a control board based on an 18 pin microcontroller (a Picaxe18A), and can have up to four small satellite boards (not included in base...	A$22.00 ... more info
	20 segment giant LED bargraph kit This kit consists of a circuit board measuring around 163 x 29mm which has provision for mounting 20 of the 14 X 7mm dual LED indicators on it to...	A$19.00 ... more info
	20 segment giant LED bargraph kit - no LEDS or ICs This is a the short form version of this kit, it contains no driver ICs or LEDs (but does contain the PCB and all other components), you will need to...	A$10.00 ... more info
	8 pin microcontroller RGB LED kit #1 This kit uses three of the Lumileds Superflux LEDs and a tiny microcontroller (a Picaxe08M) to produce an animated lighting effect that is activated...	A$21.00 Add:
	8 pin microcontroller RGB LED kit #2 This kit is similar to the #1 kit, but is much smaller (32 x 24mm) and uses a single RGB 5mm LED (not the superflux LED shown) in place of three...	A$14.00 Add:
	80 LED, two colour backlight panel and driver kit This kit consists of a 6 inch long x 1 inch high backlight module, along with a PCB that mounts to the back of the module and contains a MM5451 LED...	A$19.00 Add:
	9 volt battery LED torch kit mark 2 Got old 9 volt batteries lying around? This kit makes good use of them! Every year when you change smoke alarm batteries, you end up with a handful...	A$7.00 Add:
	Fairchild FAN5646 'breathing' LED flasher IC kit Normally if you want to drive a LED so that it flashes, you either have to use a flashing LED (of which types are limited) or a external circuit....	A$4.50 Add:
	Joule thief kit This kit is based on a very simple stepup converter circuit that can run from 1.5 volts or less and drive a white LED to good brightness. Ideal for...	A$9.00 Add:
	Linear LED driver kit This is a linear LED constant current driver that can provide up to 700mA of current to drive LEDs. While switchmode drivers are usually very...	A$8.00 Add:
	Modular digits with serial interface kit This kit is a pair of 7-segment LED display modules which can be simply controlled by a 2-wire serial connection, using the RS232 protocol. Up to 255...	A$44.95 Add:
	Pic micro controlled LED driver kit This fantastic LED driver kit was developed by The LED Artist (www.theledart.com) The driver is fully pic microcontroller controlled and can operate...	A$34.00 Add:
	PLCC 84 pin socket for universal clock IC This is a standard through-hole IC socket to suit the Universal Clock IC, or any other 84 pin PLCC IC. This makes it easier to work with the IC as it...	A$0.60 Add:
	Satellite board kit for 18 pin microcontroller kit These are the add-on satellite boards for the 18 pin Picaxe microcontroller RGB LED kit.	A$8.00 ... more info
	Universal clock IC This device enables you to build a clock using a handful of components and your own choice of display. It has a 7 segment display driver built in. It...	A$12.50 Add:
	Velleman LED driver kit This kit delivers accurate constant current required by most high-power LEDs. Features include: high efficiency due to switch mode principle built-in...	A$14.95 Add: