LED driver ICs

Displaying 1 to 10 (of 12 Products)

120V, 50mA surface mount LED constant current IC

These are not really resistors, but are in fact a linear constant current driver. They have a maximum input voltage of 120 volts and have a fixed output current of 50mA. Rated power dissipation is up...

$1.00

Add:

3 channel slow LED flasher IC

Tiny SOT23-6 case SMD ICs that will drive up to three LEDs at different flash rates. The three output channels flash once per second, once every two seconds, and once every three seconds. Just select...

$1.00

Add:

3 mode LED flasher IC

Tiny SOT23-5 case SMD ICs that will drive a single LED directly to produce three different modes. Press once for continuously on, press again for fast flash, press a third time for slower flash, and...

$1.00

Add:

50V, 350mA surface mount LED constant current IC

These are a linear constant current driver. They have a maximum input voltage of 50 volts and have a fixed output current of 350mA. Rated power dissipation is up to 5.8W (with adequate heatsinking)....

$1.00

Add:

8 channel flickering flame simulator LED flasher IC

Tiny SOP14 case SMD ICs that will drive up to eight LEDs in a sequence to simulate a flickering flame. See the video for details. Just apply power, up to 4.5V, and the IC runs continuously. See basic...

$1.00

Add:

8 mode RGB LED driver IC

Tiny SOT23-5 case SMD ICs that will drive a common anode RGB LED (or three individual LEDs) to produce different colours and animations. Mode is selectable using the switch input. See basic data...

$1.00

Add:

RGB animating LED driver IC

Tiny SOT23-6 case SMD ICs that will drive a common anode RGB LED (or three individual LEDs) to produce different colours and animations, a lot like the RGB fast animating LEDs. The switch input seems...

$1.00

Add:

Surface mount 1Hz LED flasher IC

These great little chips will flash 3 LEDs in sequence, followed by a short pause. Use it to flash one LED at a slow rate, or up to 3 in sequence. See the video below for the flash sequence of one of...

$0.90

Add:

Optosupply dual linear LED driver IC

These are not really resistors, but are in fact dual linear constant current drivers in the one package. They have a maximum input withstand voltage of 70 volts and have a fixed output current of...

$0.80

Add:

Optosupply linear LED driver IC

These are not really resistors, but are in fact linear constant current drivers. They have a maximum input withstand voltage of 70 volts and have a fixed output current of 18mA (16-19mA range). They...

$0.60

Add:

Displaying 1 to 10 (of 12 Products)