Blue, green and cyan 5mm LEDs

Superbright green LEDs in a standard 5mm clear tinted case. These have inbuilt resistors for use on voltages from 3 to 15 volts (rated 12V nominal) without the need for external resistors. Simplifies...

These are a superbright 5mm flashing blue LED with a wide angle blue tinted diffuse case and long (25/27mm) leads. Brightness is around 1000mcd at a quite wide beam angle, so they are good for...

These are a 5mm 8,400mcd, 470nm blue LED with an attached 1.5 volt booster circuit. They will run from any voltage between 0.8 to 1.6V DC, making them ideal for use with 1.2 and 1.5V batteries. The...

These are nice green (525nm) superbright LEDs. But unlike our regular 5mm LEDs, these have an inbuilt resistor for use on up to 13V, so just connect them directly to a 12V DC power source and you are...

These are nice ice blue (sky blue) superbright LEDs. But unlike our regular 5mm LEDs, these have an inbuilt resistor for use on up to 13V, so just connect them directly to a 12V DC power source and...

Superbright generic Chinese blue LED. Rated at 20,000 mcd at a 20 degree viewing angle at 20mA. Ideal where a very bright blue, low cost, non-critical LED is required. Vf is a typical 3.2 volts,...

Superbright green LED rated at 20,000 mcd at a 20 degree viewing angle at 20mA. Ideal where a low cost, non-critical LED is required. Vf is a typical 3.2 volts, wavelength around 525nm.

Superbright blue LED rated at 30,000 mcd at a 15° viewing angle at 50mA. Ideal where a very bright blue LED is required. Made by Optosupply, part number OSB56L5111P, datasheet is here.

Superbright flashing blue LED. Rated at 8,000mcd at 20 degree angle at 20mA. Should be used with a resistor like any other LED.

These are rated at 8,000mcd at a 20 degree angle. Recommended input voltage is 5 volts, and they flash at around a 1Hz rate.

These are the LEDs you see in the flickering flame imitation candles so popular nowadays. They contain a blue LED and an IC that changes the brightness of the LED in a pseudo-random way to imitate a...

These are the LEDs you see in the flickering flame imitation candles so popular nowadays. They contain a green LED and an IC that changes the brightness of the LED in a pseudo-random way to imitate a...

These superbright blue LEDs have a blue tinted transparent case. They look nice when off as well as when on. They have a viewing angle around 20 degrees so don't have the light dispersion that the...

Superbright blue LEDs in a standard 5mm narrow angle case. These have inbuilt current control for use on voltages from 5 to 15 volts (rated 12V nominal) without the need for external resistors....

These superbright green LEDs have a green tinted transparent case. They look nice when off as well as when on. They have a viewing angle around 20 degrees so don't have the light dispersion that the...

These are 5mm superbright LEDs prewired with a resistor and 150-250mm of flying leads, ready to be used on any DC voltage from 9 to 14 volts. They are ideal for automotive use, or for when you need a...

These are 5mm superbright LEDs prewired with a resistor and 150-250mm of flying leads, ready to be used on any DC voltage from 9 to 14 volts. They are ideal for automotive use, or for when you need a...

These are from A-Bright Industrial Company in Taiwan, the same LED brand as one of the big hobbyist electronic component stores, just without the crazy prices! They are water clear 5mm LEDs that...