Red, orange, amber and infrared 5mm LEDs

Superbright red LEDs in a standard 5mm clear tinted case. These have inbuilt resistors for use on voltages from 3 to 15 volts (rated 12V nominal) without the need for external resistors. Simplifies...

Superbright red LEDs in a standard 5mm clear tinted case. These have inbuilt resistors for use on voltages from 3 to 15 volts (rated 12V nominal) without the need for external resistors. Simplifies...

These are a superbright 5mm flashing red LED with a wide angle red tinted diffuse case and short (15/17mm) leads. Brightness is around 1000mcd at a quite wide beam angle, so they are good for general...

These are nice yellow (amber) superbright LEDs. But unlike our regular 5mm LEDs, these have an inbuilt resistor for use on up to 13V, so just connect them directly to a 12V DC power source and you...

These are nice water clear 5mm LEDs that light up a very bright true red (not red-orange). Rated at 6,000-10,000mcd at 20mA with a 15 degree viewing angle. Rated wavelength is 660-670nm. Vf is...

Bright superbright amber/yellow (590nm) LED. Rated at 14,000mcd at 20mA current at a viewing angle of 30 degrees. These have a standard 5mm LED case with short (15mm/17mm) leads. Note: these now come...

Bright superbright true orange (605nm) LED. Rated at 20,000mcd at 20mA current at a viewing angle of 20 degrees. Note: sometimes these LEDs are manufactured with the case flange flat (which normally...

Superbright red LED, wavelength rated at 630nm. The supplier rates these at 20,000 mcd at 20mA current at a viewing angle of 20 degrees. They are indeed very bright and are ideal where you need a...

Superbright red-orange LED, wavelength rated at around 615nm The supplier rates these at 20,000 mcd at 20mA current at a viewing angle of 20 degrees. They are indeed very bright and are ideal where...

Superbright flashing amber/yellow (590nm) LED. Rated at 5,000mcd at 20 degree angle at 20mA. Flash rate is 1.5 - 2Hz.

Superbright flashing true orange (605nm) LED. Rated at 5,000mcd at 20 degree angle at 20mA. Flash rate is 1.5 - 2Hz.

Superbright flashing red LED. Rated at 5,000mcd at 20 degree angle at 20mA. Should be used with resistors like any other LED.

These are the LEDs you see in the flickering flame imitation candles so popular nowadays. They contain an amber/yellow (590nm) LED and an IC that changes the brightness of the LED in a pseudo-random...

Superbright flashing amber/yellow (590nm) LED. Rated at 2,000mcd at 20 degree angle at 20mA. Maximum input voltage 5 volts, even when using a resistor (when the LED is off, it's internal chip sees...

These are the LEDs you see in the flickering flame imitation candles so popular nowadays. They contain an true orange (605nm) LED and an IC that changes the brightness of the LED in a pseudo-random...

These are 5mm superbright orange (605nm) LEDs prewired with a resistor and 150-250mm of flying leads, ready to be used on any DC voltage from 9 to 14 volts. They are ideal for automotive use, or for...

These are 5mm superbright orange (605nm) LEDs prewired with a resistor and 150-250mm of flying leads that terminates in a standard 9V battery snap. They are ready to be used on any DC voltage from 5...

These are the LEDs you see in the flickering flame imitation candles so popular nowadays. They contain a red-orange (620nm) LED and an IC that changes the brightness of the LED in a pseudo-random way...