Multicolour/RGB LEDs

Displaying 1 to 10 (of 46 Products)

Flat 2 x 3 x 4mm wide angle blue/pink bipolar LEDs

Nice bipolar 234 sized waterclear LEDs from Optosupply. They light superbright blue one way, or superbright pink with reverse polarity. These are perfect for general illumination, models and anywhere...

$0.80

Add:

Wide angle 4 pin 4.8mm RGB LED - common anode

These LEDs contain three separate LED chips, red, green and blue. By driving the three chips separately, you can produce any colour that you wish, including white light. They are packaged in the...

$0.40

Add:

Wide angle 4 pin 4.8mm RGB LED - common cathode

These LEDs contain three separate LED chips, red, green and blue. By driving the three chips separately, you can produce any colour that you wish, including white light. They are packaged in the...

$0.40

Add:

12V 5mm RGB fast sequence water clear animating resistor LED

These RGB LEDs have a fast speed fading sequence that changes colour every 0.5 seconds or so - very eyecatching. But unlike our regular RGB LEDs, these have an inbuilt resistor for use on up to 13V,...

$0.50

Add:

12V 5mm RGB slow sequence water clear animating resistor LED

These RGB LEDs have a slow speed fading sequence that changes colour every 5 seconds or so - very eyecatching. But unlike our regular RGB LEDs, these have an inbuilt resistor for use on up to 13V, so...

$0.50

Add:

2mm tower red/cool white bipolar superbright LED

These have a standard 2mm tower style waterclear case and light up white in one direction, and red when you reverse polarity. Both chips are superbright and produce a strong, intense light for the...

$0.75

Add:

2mm tower red/warm white bipolar superbright LED

These have a standard 2mm tower style waterclear case and light up white in one direction, and red when you reverse polarity. Both chips are superbright and produce a strong, intense light for the...

$0.75

Add:

3mm Red-Blue flashing LED

These LEDs have red and blue chips and a flashing controller IC which alternated between the colours. The LEDs change colour at around a 2Hz rate, so they complete a cycle from red to blue, back to...

$0.25

Add:

3mm Red/Blue bipolar LED

This is a 3mm bicolour LED for general indication and other purposes. These LEDs have a standard 3mm body with two leads, but contain two LEDs connected in reverse-parallel. When the LED is connected...

$0.30

Add:

3mm Red/Green 3-pin LEDs - common cathode

A bicolour LED made for general indication and other purposes. These LEDs have a standard 3mm body with three leads, and are wired with a common cathode. The device can light up red or green,...

$0.25

Add: