Categories

Multicolour/RGB LEDs

(image for) 5mm red/green high brightness common anode 3-pin LED

5mm red/green high brightness common anode 3-pin LED

These 5mm LEDs have separate red and green high brightness chips, so you can have either red or green (the green chip is brighter than the red). They are common anode with a milky diffuse case....
$0.20
Add:
(image for) 5mm red/green high brightness common cathode 3-pin LED

5mm red/green high brightness common cathode 3-pin LED

These 5mm LEDs have separate red and green high brightness chips, so you can have either red or green (the green chip is brighter than the red). They are common cathode with a milky diffuse case....
$0.20
Add:
(image for) 5mm Red/Green standard brightness bipolar LED

5mm Red/Green standard brightness bipolar LED

This is a standard brightness 5mm bicolour LED for general indication and other purposes. These LEDs have a standard 5mm body with two leads, but contain two LEDs connected in reverse-parallel. When...
$0.20
Add:
(image for) 5mm RGB fast sequence animating LED - diffuse case

5mm RGB fast sequence animating LED - diffuse case

These RGB LEDs are fitted with an inbuilt controller chip that lets them produce a sequence of colour changes and mixes, which includes both fast and medium speed sequences. Ideal for eye-catching...
$0.30
Add:
(image for) 5mm RGB fast sequence animating LED - water clear case

5mm RGB fast sequence animating LED - water clear case

These RGB LEDs are fitted with an inbuilt controller chip that lets them produce a sequence of colour changes and mixes, which includes both fast and medium speed sequences. Ideal for eye-catching...
$0.30
Add:
(image for) 5mm RGB slow sequence animating LED - diffuse case

5mm RGB slow sequence animating LED - diffuse case

These RGB LEDs have a slow speed fading sequence that changes colour every 5 seconds or so - very eyecatching. Standard 5mm milky white diffuse case for good colour mixing. Should be used with a...
$0.30
Add:
(image for) 5mm RGB slow sequence animating LED - water clear case

5mm RGB slow sequence animating LED - water clear case

These RGB LEDs have a slow speed fading sequence that changes colour every 5 seconds or so - very eyecatching. Standard 5mm LED case. Should be used with a resistor, just like any other LED. Note:...
$0.30
Add:
(image for) A-Bright 5mm red/green 3-pin common cathode LED

A-Bright 5mm red/green 3-pin common cathode LED

These 5mm LEDs are from A-Bright, so good quality. They have separate red and green standard brightness chips and are wired with a common cathode, so you can have either red, green or both, which...
$0.50
Add:
(image for) Big chip water clear 4 pin 5mm RGB LED - common cathode

Big chip water clear 4 pin 5mm RGB LED - common cathode

These LEDs contain three separate LED "14 mil" chips, red, green and blue. The green and blue are actually rectangular, but all three chips are much larger than typical 20mA RGB LEDs. By driving the...
$0.40
Add:
(image for) Diffuse 4 pin 10mm RGB LED - common anode

Diffuse 4 pin 10mm RGB LED - common anode

These LEDs contain three separate LED chips, red, green and blue. By driving the three chips separately, you can produce any colour that you wish, including white light. They are packaged in the...
$0.70
Add:

Shopping Cart  [more]

Your cart is empty.

Other interesting sites

Manufacturers

Your IP Address is: 18.97.14.82
Copyright © 2025 LEDsales. Powered by Zen Cart