Information

More Information

Home :: LEDs, LED drivers and accessories :: Standard brightness LEDs

Standard brightness LEDs

Displaying 1 to 10 (of 17 Products)

1 x 3 x 4mm general purpose red LED

A small, flat through-hole LED for general indication. A nice true red LED at a few tens of mcd at 20mA, so it's ideal for PCB indicators or whatever, without being too bright. Measures 3mm wide x...

$0.20

Add:

A-Bright yellow 5mm LED

These are from A-Bright Industrial in Taiwan. They are yellow tinted diffused 5mm standard brightness LEDs. Rated at 8mcd at 20mA with a 50 degree viewing angle. Rated wavelength is 585nm. Part...

$0.15

Add:

Fairchild 5mm red bullet shaped LED

These are 5mm diameter by around 6mm long and have a red bullet-shaped body. They are ideal for general use as indicators where a superbright LED is not required - ideal as 'eyes' on that bug robot!...

$0.08

Add:

Min: 10

Green 3mm standard brightness LED

These are standard brightness 3mm green LEDs with a diffuse green tinted case. I don't have specs on these, but they are manufactured by Rohm, part number SLR-342MGT32. They appear to have a...

$0.10

Add:

Min: 10

Green 3mm standard brightness LED with formed leads

These are standard brightness 3mm green LEDs with a diffuse green tinted case and leads preformed into a 90 degree bend. I don't have specs on these, but they are part number BL-B214EL-10. They are...

$0.06 $0.02
Save: 67% off

Add:

Min: 10

Green 5mm LED

These are standard brightness 5mm green (570nm) LEDs with a wide viewing angle and a diffuse green tinted case. Basic ratings are 10mcd @ 20mA with a viewing angle of 50-60 degrees. Forward voltage...

$0.05

Add:

Green standard brightness 1.8mm LED

These standard brightness green LEDs have the 1.8mm short "tower" case and have a green tinted lens. A very compact light source for models etc. Specs are typical of small green LEDs, ie Vf around...

$0.20

Add:

Kingbright 3.5mm red cylindrical LED

These are 3.5mm diameter by around 6mm long and have a red cylindrical body with a flat end. They are ideal for general use as indicators where a superbright LED is not required - ideal as 'eyes' on...

$0.05

Add:

Kingbright 3mm yellow standard brightness LED

These are standard brightness yellow LEDs in a 3mm tinted diffuse case. Supplied on tape. They are Kingbright brand LEDs, part number L-934YD and are rated at 10-12.5mcd @ 20mA.

$0.08

Add:

Min: 10

Kingbright green 15 volt resistor LEDs

These 5mm LEDs incorporate a built-in resistor so they can be run on power supplies of up to 15 volts. They are standard brightness LEDs with diffuse, tinted cases. Datasheet is here.

$0.50

Add:

Displaying 1 to 10 (of 17 Products)