Addressable/programmable LEDs and arrays

Displaying 1 to 6 (of 6 Products)

3W RGB WS2811 compatible 12 V LED module

Great little LED modules consisting of a 47.5mm hexagonal PCB with a 3W RGB LED and inbuilt driver and WS2811 compatible controller IC. Just connect to 12V and appropriate control signal and you're...

$15.00

Add:

5mm RGB addressable LEDs - WS2812 compatible

These 5mm LEDs have red, green and blue LED chips all controlled by an addressable driver IC which is WS2812 compatible, so they can be controlled using the readily available libraries for Arduino...

$0.65

Add:

8 x 32 pixel flexible addressable RGB display

These great displays are an array of 8 x 32 addressable (WS2812 standard) RGB pixels. They measure 80mm x 320mm and have 5050 RGB LEDs. Each array has input (Din, 5V, Gnd) and output (Dout, 5V, Gnd)...

$26.00

Add:

RGBW 5050 LEDs on 10mm PCBs - WS2812 compatible

These 5050 LEDs have red, green, blue and white (can vary from 4500k neutral to 6500k cool depending on stock) LED chips all controlled by an addressable driver IC which is WS2812 compatible, so they...

$0.55

Add:

RGBWW 5050 LEDs on 10mm PCBs - WS2812 compatible

These 5050 LEDs have red, green, blue and warm white (3000K) LED chips all controlled by an addressable driver IC which is WS2812 compatible, so they can be controlled using the readily available...

$0.55

Add:

WS2811 addressable RGB LED module

Nice little WS2811 compatible addressable RGB LED modules from Worldsemi. These require a WS2811 compatible controller, and run from 12V DC. They measure 32mm square. Part number HC-F12V-3535-PCBA,...

$0.50

Add:

Displaying 1 to 6 (of 6 Products)