Computer, Raspberry Pi, Arduino etc accessories

(image for) 11 x 11 x 5mm tiny heatsinks for LEDs and ICs - pretaped

11 x 11 x 5mm tiny heatsinks for LEDs and ICs - pretaped

These tiny heatsinks measure just 11mm square and 5mm high. They are finished in black anodising for good heat radiation and come with thermal tape already applied, so just peel and stick. These are...
$0.35
Add:
(image for) 18 x 13 x 6mm heatsinks for LEDs, power supply modules etc

18 x 13 x 6mm heatsinks for LEDs, power supply modules etc

These tiny heatsinks measure 13mm wide, 18mm long and 6mm high. They have a 13mm x 13mm square heatsink surface which has thermal tape already applied. Originally designed for cooling RAM chips in...
$0.55
Add:
(image for) 8.8 x 8.8 x 5mm tiny heatsinks for LEDs and ICs - pretaped

8.8 x 8.8 x 5mm tiny heatsinks for LEDs and ICs - pretaped

These tiny heatsinks measure just 8.8mm square and 5mm high. They are finished in black anodising for good heat radiation and come with thermal tape already applied, so just peel and stick. These are...
$0.35
Add:
(image for) Breadboard jumper wire pack - female to female

Breadboard jumper wire pack - female to female

This is a 200mm long piece of 40 way rainbow ribbon wire with the ends of each wire terminated in a female socket. They are ideal for jumpering one PCB to another or connecting LEDs to PCBs so they...
$3.00
Add:
(image for) Breadboard jumper wire pack - female to male

Breadboard jumper wire pack - female to male

This is a 200mm long piece of 40 way rainbow ribbon wire with one end of each wire terminated in a female socket and the other ends terminated in a male pin. They are ideal for jumpering one PCB to...
$3.00
Add:
(image for) Breadboard jumper wire pack - male to male

Breadboard jumper wire pack - male to male

This is a 200mm long piece of 40 way rainbow ribbon wire with each end of each wire terminated in a male pin. They are ideal for jumpering one PCB to another. Of course, being ribbon cable, you can...
$3.00
Add:
(image for) Micro USB breakout board

Micro USB breakout board

This little board has a micro USB socket and solder pads to allow you to access the USB lines easily. Use it to make custom USB lights, or whenever you need to tap into USB power. Board measures...
$0.30
Add:
(image for) Panel mount USB-C socket - power only

Panel mount USB-C socket - power only

Nice little USB-C panel mount sockets complete with a silicone plug for protection. They come with around 150mm of flying leads and are ideal where you need to include a 5V power inlet on projects....
$1.20
Add:
(image for) U-shaped heatsink for transistors and LEDs

U-shaped heatsink for transistors and LEDs

These heatsinks measure 30(H) x 35(W) x 25(L)mm. They are black anodised aluminium for good heat radiation and are rated at 10°C/W. These are ideal where a bit of extra cooling is needed, such as...
$0.35
Add:
(image for) USB-C plug breakout board

USB-C plug breakout board

This little board has a USB-C plug and solder pads to allow you to access the power, data and ground USB lines easily. Use it to make custom USB lights, or whenever you need to tap into USB power....
$0.50
Add:

Shopping Cart  [more]

Your cart is empty.

Other interesting sites

Manufacturers

Specials  [more]

(image for) 5mm blue breathing LED
5mm blue breathing LED
$0.70  $0.30
Save: 57% off
Your IP Address is: 18.97.9.169
Copyright © 2025 LEDsales. Powered by Zen Cart