Adjustable mini DC-DC step-up converter with ceramic caps

  • Shipping Weight: 10g
  • Units in Stock: 1

$13.00  $6.00
Save: 54% off

These little converters use ceramic caps for high reliability compared to electrolytic caps used in most power supplies. They are ideal when you need to step up a voltage.


  • Type: non-isolated step-up module
  • Input voltage: 2.5 to 25VDC
  • Output voltage: 5 to 25VDC adjustable
  • Input Current: 4A (max) (input voltage greater than 3V), short 5A (less than 10 seconds)
  • Output power:
  • 10W max (input voltage >3V - eg: input 3.7V, output 5V 2A)
  • 15W max (input voltage >5V - eg: input 5V, output 12V 1.25A)
  • 25W max (input voltage >12V - eg: input 12V, output 19V 1.3A)
  • Efficiency: Up to 95% (the higher the input voltage, the higher the efficiency)
  • Output ripple: 50mV (typical)
  • Operating temperature: -40°C to +85°C (if ambient temperature exceeds 40°C,
  • lower power use or enhance heat dissipation)
  • Load regulation: ±0.5%
  • Voltage regulation: ±0.5%
  • Undervoltage protection: None
  • Short circuit protection: None (Please install fuses and protection circuits at input)
  • Input reverse polarity protection: None (use series diode at input if likely to connect incorrectly)
  • Connection: Solder pads on DIP24 spacing
  • Dimensions: 19mm wide x 30mm long x 14mm high (approx)

Add to Cart:

This product was added to our catalog on Friday 25 January, 2013.

Your IP Address is:
wabusiness template