Tiny 0-100VDC panel meter - yellow

  • Model: DPM_MINI_100V_YW
  • Shipping Weight: 7g
  • Units in Stock: 20


These tiny voltmeters can measure up to 100VDC as they have a separate power supply wire and a common ground. You can use them in two ways:

If you connect the positive supply wire (red) and the voltage sense wire (yellow or white) together, you have a meter that will measure up to 30 volts DC and which is powered from the voltage to be measured, so needs no extra power supply.

If you want to measure the full voltage range of 0-100V, then you power the meter via the red wire (the supply can be from 3 to 30V) and feed the voltage to be measured into the yellow/white wire. The black wire is the common ground.

These are ideal as battery monitors or anywhere you need a small panel meter.

Dimensions: approx 24mm x 11mm x 9mm, not including lugs
Display area size: 23.5mm x 10.5mm
Measuring range: 0-100V DC
Display: 0.28 inch (7.1mm) three digit
Resolution: 0.1V
Refresh rate: 500ms
Minimum input: 0V DC
Maximum input: 100V DC
Power supply: 3-30V DC
Working temperature: -10 to 65°C

Note: these are not polarity protected and must be connected the correct way or they may be damaged.

Add to Cart:

This product was added to our catalog on Friday 11 January, 2013.

Your IP Address is:
wabusiness template