3 channel, 6A inline RGB controller

  • Shipping Weight: 30g
  • Units in Stock: 10


If you don't need remote control and just need to control some RGB or other 3 colour LED ribbon, then this is the unit for you.

Rated at 6 amps maximum continuous and operates from 5 to 24V DC. It has four buttons that let you select the mode, speed, brightness etc, so it's much more than a simple dimmer. There are several colour changing/fading modes, or select the fixed colour you desire.

This controller is tiny, and is around 55mm long x 15mm wide x 11mm thick. It has a 5.5 x 2.1mm flying lead plug (positive to tip) for power input and the LED ribbon end has a 4 position header socket to match the standard pins on most common anode LED ribbons.

Add to Cart:

This product was added to our catalog on Tuesday 09 June, 2020.

WARNING: An Error occurred, please refresh the page and try again.