Circuit boards and accessories

These tiny terminal blocks have a 2.54mm spacing making them ideal for connections to protoboard projects or wherever you need a very compact terminal block. Note that these terminal blocks do not...

These tiny terminal blocks have a 2.54mm spacing making them ideal for connections to protoboard projects or wherever you need a very compact terminal block. Note that these terminal blocks do not...

This is a bare PCB set for our LED tester kit. You get three PCBs - the front panel, main component PCB and the back panel (each board measures 64 x 85mm). No components are supplied. Download the...

This is the bare PCB for our Forever Flasher kit. This simple kit uses one IC to flash a pair of LEDs at a low level using an extremely low average current. The kit runs from 9V DC and will run...

These nice green fibreglass PCBs have rows of pads on each side, making them more robust than single sided boards. Ideal for making LED arrays and other projects. The boards have 55 rows with 37 pads...

This PCB allows you to make a LED array easily and neatly. It consists of a high grade, double sided fibreglass PCB with white solder mask for good reflectivity. It holds up to 144 LEDs of any size,...

These nice green fibreglass PCBs have rows of pads on each side, making them more robust than single sided boards. Ideal for making LED arrays and other bigger projects. The boards have 74 rows with...

This nice material measures 180mm wide by 300mm long and 0.4mm thick. It is FR4 black fibreglass material with isolated pads in a 0.1" x 0.1" grid, on one side only. The material is easily cut with...

These nice little green fibreglass PCBs have rows of pads on each side, making them more robust than single sided boards. Ideal for making small LED arrays and other small projects. The boards have...

These nice little green fibreglass PCBs have rows of pads on each side, making them more robust than single sided boards. Ideal for making small LED arrays and other small projects. The boards have...

This is the bare PCB for our 30A speed controller kit. Build it up using just the parts you need, modify it to suit your application, or whatever. This is the PCB only, no electronic components are...

These nice little green fibreglass PCBs have rows of pads on each side, making them more robust than single sided boards. Ideal for making small LED arrays and other small projects. The boards have...

These nice little green fibreglass PCBs have rows of pads on each side, making them more robust than single sided boards. Ideal for making small LED arrays and other small projects. The boards have...

These nice little green fibreglass PCBs have rows of pads on each side, making them more robust than single sided boards. Ideal for making small LED arrays and other small projects. The boards have...

These nice little green fibreglass PCBs have rows of pads on each side, making them more robust than single sided boards. Ideal for making small LED arrays and other small projects. The boards have...

These are bare double sided PCBs designed to take 9 superflux LEDs or 5mm/3mm LEDs. They are fibreglass board, not cheap phenolic resin, and have a white printed overlay and are tinned both sides....

This little board has a micro USB socket and solder pads to allow you to access the USB lines easily. Use it to make custom USB lights, or whenever you need to tap into USB power. Board measures...

This is the bare PCB from my nixie power supply kit. It allows you to make a switchmode power supply to provide up to 180 volts for your nixie projects (or any other gas discharge tube that will...