New Products

These amazing filaments are very flexible and contain many LEDs connected in parallel, so require only 3V to operate. Unlike the short filaments, ... more info

Standard nice beefy 1.3W zener diodes made by Vishay. Use for voltage regulation or providing reference voltages etc. Rated zener voltage is 3.3V at ... more info

This excellent tape has adhesive on one side and if very conductive at just a few ohms per metre (depending on width). Tape is 10mm wide and 0.1mm ... more info

A bicolour LED made for general indication and other purposes. These LEDs have a standard 3mm body with three leads, and are wired with a common ... more info

Nice superbright bipolar LEDs that light up red or yellow, depending on polarity. Made by Optosupply, part number is OSRYP2A132A.

Nice superbright bipolar LEDs that light up red or bright green (525nm), depending on polarity. Made by Optosupply, part number is OSRPP2A132A.

Nice superbright bipolar LEDs that light up red or blue, depending on polarity. Made by Optosupply, part number is OSRBP2A132A.

Nice 3mm flat-top flangeless LEDs with inbuilt resistors, so no need for external current limiting. Rated at 330mcd at a 140° viewing angle. ... more info

These amazing filaments are very flexible and contain many LEDs connected in parallel, so require only 3V to operate. We still recommend you limit ... more info

These amazing filaments are very flexible and contain many LEDs connected in parallel, so require only 3V to operate. We still recommend you limit ... more info