5mm superbright resistor LEDs

Superbright green LEDs in a standard 5mm clear tinted case. These have inbuilt resistors for use on voltages from 3 to 15 volts (rated 12V nominal) without the need for external resistors. Simplifies...

Superbright red LEDs in a standard 5mm clear tinted case. These have inbuilt resistors for use on voltages from 3 to 15 volts (rated 12V nominal) without the need for external resistors. Simplifies...

Superbright red LEDs in a standard 5mm clear tinted case. These have inbuilt resistors for use on voltages from 3 to 15 volts (rated 12V nominal) without the need for external resistors. Simplifies...

Wide angle superbright 590nm amber LEDs for general illumination, with an inbuilt resistor suitable for voltages up to 13V DC. with a 110 degree viewing angle.

Wide angle superbright 470nm blue LEDs for general illumination, with an inbuilt resistor suitable for voltages up to 13V DC. with a 110 degree viewing angle.

Wide angle superbright 525nm green LEDs for general illumination, with an inbuilt resistor suitable for voltages up to 13V DC. with a 110 degree viewing angle.

Wide angle superbright 630nm red LEDs for general illumination, with an inbuilt resistor suitable for voltages up to 13V DC. with a 110 degree viewing angle.

Wide angle superbright white LEDs for general illumination, with an inbuilt resistor suitable for voltages up to 13V DC. Rated at 2000mcd @ 20mA with a 110 degree viewing angle. 3500k colour...

Wide angle superbright white LEDs for general illumination, with an inbuilt resistor suitable for voltages up to 13V DC. Rated at 2000mcd @ 20mA with a 110 degree viewing angle.

These are nice green (525nm) superbright LEDs. But unlike our regular 5mm LEDs, these have an inbuilt resistor for use on up to 13V, so just connect them directly to a 12V DC power source and you are...

These are nice ice blue (sky blue) superbright LEDs. But unlike our regular 5mm LEDs, these have an inbuilt resistor for use on up to 13V, so just connect them directly to a 12V DC power source and...

These RGB LEDs have a fast speed fading sequence that changes colour every 0.5 seconds or so - very eyecatching. But unlike our regular RGB LEDs, these have an inbuilt resistor for use on up to 13V,...

These RGB LEDs have a slow speed fading sequence that changes colour every 5 seconds or so - very eyecatching. But unlike our regular RGB LEDs, these have an inbuilt resistor for use on up to 13V, so...

These are nice yellow (amber) superbright LEDs. But unlike our regular 5mm LEDs, these have an inbuilt resistor for use on up to 13V, so just connect them directly to a 12V DC power source and you...

Superbright blue LEDs in a standard 5mm narrow angle case. These have inbuilt current control for use on voltages from 5 to 15 volts (rated 12V nominal) without the need for external resistors....

Superbright red LEDs in a standard 5mm narrow angle case. These have inbuilt current control for use on voltages from 5 to 15 volts (rated 12V nominal) without the need for external resistors....

These red/blue LEDs have a water clear case and common cathode configuration. The LED contains two LED chips (one red, one blue) and two resistors, one for each colour. They are designed to run from...

These RGB LEDs have a water clear case and common cathode configuration. The LED contains three LED chips (one red, one green, one blue) and three resistors, one for each colour. They are designed to...