Optosupply (TruOpto) LEDs

These are very nice superbright green (525nm) diffuse LEDs from Optosupply which have inbuilt constant current drivers, so you don't need resistors. Rated output is 5,800mcd at a 30 degree beam angle...

These are very nice superbright orange (605nm) diffuse LEDs from Optosupply which have inbuilt constant current drivers, so you don't need resistors. Rated output is 3,500mcd at a 30 degree beam...

These are very nice superbright red (625nm) diffuse LEDs from Optosupply which have inbuilt constant current drivers, so you don't need resistors. Rated output is 3,000mcd at a 30 degree beam angle...

These are very nice warm white diffuse LEDs from Optosupply which have inbuilt constant current drivers, so you don't need resistors. Rated output is 4,200mcd at a 30 degree beam angle at a typical...

These are very nice superbright yellow (590nm) diffuse LEDs from Optosupply which have inbuilt constant current drivers, so you don't need resistors. Rated output is 3,000mcd at a 30 degree beam...

These nice flat top LEDs are 9.7mm in diameter and have a tinted diffuse case. They are ideal as big panel mount indicators, just drill a 9.6mm (3/8") hole and press them into place. Superbright LEDs...

These nice flat top LEDs are 9.7mm in diameter and have a white diffuse case. They are ideal as big panel mount indicators, just drill a 9.6mm (3/8") hole and press them into place. Superbright LEDs...

These nice flat top LEDs are 9.7mm in diameter and have a tinted diffuse case. They are ideal as big panel mount indicators, just drill a 9.6mm (3/8") hole and press them into place. Superbright LEDs...

These nice flat top LEDs are 9.7mm in diameter and have a tinted diffuse case. They are ideal as big panel mount indicators, just drill a 9.6mm (3/8") hole and press them into place. Superbright LEDs...

These nice flat top LEDs are 9.7mm in diameter and have a tinted diffuse case. They are ideal as big panel mount indicators, just drill a 9.6mm (3/8") hole and press them into place. Superbright LEDs...

These nice flat top LEDs are 9.7mm in diameter and have a tinted diffuse case. They are ideal as big panel mount indicators, just drill a 9.6mm (3/8") hole and press them into place. Superbright LEDs...

A dual colour superbright LED in a standard milky diffuse 2mm tower case. Three pins, common anode. Made by Optosupply, part number OSRMPA7K92B. Datasheet is here.

A dual colour superbright LED in a standard milky diffuse 2mm tower case. Three pins, common anode. Made by Optosupply, part number OSRWPA7K92B. Datasheet is here.

Nice 590nm yellow/amber (590nm) LEDs with tinted diffuse case for general indication. Rated at 220mcd at 20mA current. These are not superbright LEDs, more of a general purpose indicator style LED....

Nice 470nm blue LEDs with tinted diffuse case for general indication. Rated at 220mcd at 20mA current. These are medium brightness LEDs, suitable for general purpose indicators etc. These are...

Nice 605nm orange LEDs with tinted diffuse case for general indication. Rated at 220mcd at 20mA current. These close to superbright LEDs, so make for quite visible indicators etc. These are...

Nice superbright warm white LEDs with diffuse case for general indication and illumination. Rated current 20mA. Note that the datasheet lists them as 10,000mcd typical at 30 degree viewing angle, but...

Nice 470nm blue LEDs with water clear case. Rated at 4200 to 5800mcd at 20mA current at a 30 degree viewing angle, but we think these ratings are very conservative, these LEDs are very bright. These...