Optosupply (TruOpto) LEDs

Nice superbright warm white LEDs with diffuse case for general indication and illumination. Rated current 20mA. Note that the datasheet lists them as 10,000mcd typical at 30 degree viewing angle, but...

Nice 470nm blue LEDs with water clear case. Rated at 4200 to 5800mcd at 20mA current at a 30 degree viewing angle, but we think these ratings are very conservative, these LEDs are very bright. These...

Nice bipolar 234 sized waterclear LEDs from Optosupply. They light superbright blue one way, or superbright pink with reverse polarity. These are perfect for general illumination, models and anywhere...

These amber superflux LEDs are made by Optosupply and are designed for automotive and architectural lighting, but are ideal whenever you need a very bright yellow/amber (590nm) wide angle LED. They...

These are a 5mm 8,400mcd, 470nm blue LED with an attached 1.5 volt booster circuit. They will run from any voltage between 0.8 to 1.6V DC, making them ideal for use with 1.2 and 1.5V batteries. The...

These are a 5mm RGB fast animating LEDs with an attached 1.5 volt booster circuit and short flying leads. They will run from any voltage between 0.8 to 1.6V DC, making them ideal for use with 1.2 and...

These are a 5mm 20,000 mcd 3000K white LED with an attached 1.5 volt booster circuit. They will run from any voltage between 0.8 to 1.6V DC, making them ideal for use with 1.2 and 1.5V batteries. The...

Bright red-orange flashing LEDs in a standard 10mm water clear case. Rated at 1560mcd at 30° viewing angle, rated wavelength is 625nm. Made by Optosupply, part number OSHR0X31A, datasheet is here.

Nice superbright bipolar LEDs that light up red or blue, depending on polarity. Made by Optosupply, part number is OSRBP2A132A.

Nice superbright bipolar LEDs that light up red or bright green (525nm), depending on polarity. Made by Optosupply, part number is OSRPP2A132A.

Nice superbright bipolar LEDs that light up red or yellow, depending on polarity. Made by Optosupply, part number is OSRYP2A132A.

These are part of Optosupply's high power 3mm LED range. They are rated at 15,000mcd typical at 50mA and a 30° viewing angle and are very bright for their size. Ideal where you need an extremely...

These are part of Optosupply's high power 3mm LED range. They are rated at 25,000mcd typical at 50mA and a 30° viewing angle and are very bright for their size. Ideal where you need an extremely...

These are part of Optosupply's high power 3mm LED range. They are rated at 30,000mcd typical at 50mA and a 30° viewing angle and are very bright for their size. Ideal where you need an extremely...

These are part of Optosupply's high power 3mm LED range. They are rated at 45,000mcd typical at 70mA and a 30° viewing angle and are very bright for their size. Ideal where you need an extremely...

These are part of Optosupply's high power 3mm LED range. They are rated at 36,000mcd typical at 50mA and a 30° viewing angle and are very bright for their size. Ideal where you need an extremely...

These are part of Optosupply's high power 3mm LED range. They are rated at 45,000mcd typical at 70mA and a 30° viewing angle and are very bright for their size. Ideal where you need an extremely...

Nice little LEDs that measure 5mm wide by 7mm long and 5mm thick. Ideal for stacking together to make bargraph displays, as square marker LEDs on models etc. 605nm orange LEDs with a untinted white...