Flashing/animating LEDs

These are a superbright 5mm flashing blue LED with a wide angle blue tinted diffuse case and long (25/27mm) leads. Brightness is around 1000mcd at a quite wide beam angle, so they are good for...

These are a superbright 5mm flashing red LED with a wide angle red tinted diffuse case and short (15/17mm) leads. Brightness is around 1000mcd at a quite wide beam angle, so they are good for general...

Bright red-orange flashing LEDs in a standard 10mm water clear case. Rated at 1560mcd at 30° viewing angle, rated wavelength is 625nm. Made by Optosupply, part number OSHR0X31A, datasheet is here.

Wide angle superbright RGB LEDs with an inbuilt controller that flashes between a range of colours. Has a 10mm white diffuse case. Rated 20mA with a 110 degree viewing angle. You must use a resistor...

Wide angle superbright RGB LEDs with an inbuilt controller that slowly fades between a range of colours. Has a 10mm white diffuse case. Rated 20mA with a 110 degree viewing angle. You must use a...

These RGB LEDs have a fast speed fading sequence that changes colour every 0.5 seconds or so - very eyecatching. But unlike our regular RGB LEDs, these have an inbuilt resistor for use on up to 13V,...

These RGB LEDs have a slow speed fading sequence that changes colour every 5 seconds or so - very eyecatching. But unlike our regular RGB LEDs, these have an inbuilt resistor for use on up to 13V, so...

These are the LEDs you see in the flickering flame imitation candles so popular nowadays. They contain a blue (470nm) LED and an IC that changes the brightness of the LED in a pseudo-random way to...

These are the LEDs you see in the flickering flame imitation candles so popular nowadays. They contain a green (525nm) LED and an IC that changes the brightness of the LED in a pseudo-random way to...

These are the LEDs you see in the flickering flame imitation candles so popular nowadays. They contain an orange (605nm) LED and an IC that changes the brightness of the LED in a pseudo-random way to...

These are the LEDs you see in the flickering flame imitation candles so popular nowadays. They contain a red (625nm) LED and an IC that changes the brightness of the LED in a pseudo-random way to...

These LEDs have red and blue chips and a flashing controller IC which alternated between the colours. The LEDs change colour at around a 2Hz rate, so they complete a cycle from red to blue, back to...

These RGB LEDs are fitted with an inbuilt controller chip that lets them produce a sequence of colour changes and mixes, which includes both fast and medium speed sequences. Ideal for eye-catching...

These RGB LEDs have a slow speed fading sequence that changes colour every 5 seconds or so - very eyecatching. Standard 3mm LED case. Should be used with a resistor, just like any other LED. Note:...

These are water clear 3mm LEDs that flash a very bright blue at a rate of 1-2Hz. Rated at 20mA, treat them like a regular blue LED.

These are water clear 3mm LEDs that flash a very bright green at a rate of 1-2Hz. Rated at 20mA, treat them like a regular green LED.

These are water clear 3mm LEDs that flash a very bright green at a rate of 1-2Hz. Rated at 20mA, treat them like a regular green LED. Note that these have 5V flasher chips inside, so should be used...

These are water clear 3mm LEDs that flash a very bright red at a rate of 1-2Hz. Rated at 20mA, treat them like a regular red LED.