Flashing/animating LEDs

These are water clear 3mm LEDs that flash a bright yellow at a rate of 1-2Hz. Rated at 20mA, treat them like a regular yellow LED. Note that these have 5V flasher chips inside, so should be used on...

These are the LEDs you see in the flickering flame imitation candles so popular nowadays. They contain an amber/yellow (590nm) LED and an IC that changes the brightness of the LED in a pseudo-random...

Wide angle superbright RGB LEDs with an inbuilt controller that flashes between a range of colours. Has a 4.8mm wide angle case. Rated 20mA with a 110 degree viewing angle. You must use a resistor...

Wide angle superbright RGB LEDs with an inbuilt controller that flashes between a range of colours. Has a 4.8mm wide angle white diffuse case. Rated 20mA with a 110 degree viewing angle. You must use...

Wide angle superbright RGB LEDs with an inbuilt controller that slowly fades between a range of colours, in a 4.8mm wide angle case. Rated 20mA with a 110 degree viewing angle. You must use a...

Wide angle superbright RGB LEDs with an inbuilt controller that slowly fades between a range of colours, in a 4.8mm wide angle case. Rated 20mA with a 110 degree viewing angle. You must use a...

These are rated at 10,000mcd at a 20 degree angle. Treat them like any other 20mA white LED, so they must be used with resistors. Flash rate is around 1.5Hz. May have short (17/15mm) or long...

Superbright flashing amber/yellow (590nm) LED. Rated at 5,000mcd at 20 degree angle at 20mA. Flash rate is 1.5 - 2Hz.

Superbright flashing true orange (605nm) LED. Rated at 5,000mcd at 20 degree angle at 20mA. Flash rate is 1.5 - 2Hz.

Superbright flashing red LED. Rated at 5,000mcd at 20 degree angle at 20mA. Should be used with resistors like any other LED.

Superbright flashing blue LED. Rated at 8,000mcd at 20 degree angle at 20mA. Should be used with a resistor like any other LED.

These are rated at 8,000mcd at a 20 degree angle. Recommended input voltage is 5 volts, and they flash at around a 1Hz rate.

These are the LEDs you see in the flickering flame imitation candles so popular nowadays. They contain an amber/yellow (590nm) LED and an IC that changes the brightness of the LED in a pseudo-random...

These are the LEDs you see in the flickering flame imitation candles so popular nowadays. They contain a blue LED and an IC that changes the brightness of the LED in a pseudo-random way to imitate a...

Superbright flashing amber/yellow (590nm) LED. Rated at 2,000mcd at 20 degree angle at 20mA. Maximum input voltage 5 volts, even when using a resistor (when the LED is off, it's internal chip sees...

These are the LEDs you see in the flickering flame imitation candles so popular nowadays. They contain a green LED and an IC that changes the brightness of the LED in a pseudo-random way to imitate a...

These are the LEDs you see in the flickering flame imitation candles so popular nowadays. They contain an true orange (605nm) LED and an IC that changes the brightness of the LED in a pseudo-random...

These are the LEDs you see in the flickering flame imitation candles so popular nowadays. They contain a pink LED and an IC that changes the brightness of the LED in a pseudo-random way to imitate a...