DC linear, switchmode and AC mains drivers

These little drivers are designed for use in single cell lithium battery flashlights but are ideal for anywhere you need to drive a single 5050 SMD power LED to near full brightness from a single...

These little drivers are designed for use in flashlights but are ideal for anywhere you need to drive a single 5050 style 10W LED to near full brightness. Input voltage is rated at 3 to 15V DC and...

This neat little driver will step up any voltage between 5 and 32V to boost a string of LEDs or LED array at a 900mA fixed current. Maximum output voltage is 60V, while maximum input current is 5A....

These buck drivers operate from 8 to 25V DC (they have input polarity protection) and will output up to 3A. They have an onboard trimpot to set the current from 0.12 - 2.94A, as well as a PWM input...

This constant current LED driver is made for 10 watt LEDs. It is ideal for powering 10W LEDs or LED arrays from cars, solar or other battery systems, as well as from mains power supplies. It is...

These are the tiniest switchmode LED drivers we've found so far. They measure just 6.5mm wide by 9mm long and have a complete constant current switchmode driver onboard. Output current is a fixed...

Nice little buck drivers which are adjustable from 20mA to 900mA using the onboard potentiometer. You can also control the output current using a PWM input signal, or use the PWM input as an enable...

These excellent little drivers are made for flashlights, but are ideal wherever you need a small driver for high powered LEDs needing around 1.25A. They are designed for a single LED but may drive...

This pre-built module will drive a single 1-watt high power LED at 350mA from a nominal 1.5 volt DC source, such as a 1.5 volt battery. They are ideal for use in torch conversions, or anywhere you...

These excellent little drivers are made for flashlights, but are ideal wherever you need a small driver for high powered LEDs needing around 1.5A. They are designed for a single LED but may drive...

This pre-built module will drive a single 3-watt high power LED at 700mA from a 1.2 to 4.2 volt DC source, such as a 1.5 volt battery or a single lithium cell. They are ideal for use in torch...

These nice little drivers are fully dimmable using a PWM signal and are ideal for driving one or more power LEDs at 350mA. Uses the PT4115 LED driver IC. Specifications Input voltage: 7 to 30VDC (24V...

These nice little drivers are fully dimmable using a PWM signal and are ideal for driving one or more power LEDs at 700mA. Uses the PT4115 LED driver IC. Specifications Input voltage: 7 to 30VDC (24V...

This pre-built module will drive one, two or three 1-watt high power LEDs at 280mA from a 12 volt AC or DC source, making it ideal for use in automotive and solar power situations. The unit consists...

This pre-built module will drive up to three 3-watt high power LEDs in series at 600mA from a 6-25V volt DC or 6-17V AC source, making it ideal for use in automotive and solar power situations. The...

These look like 20mm circular LED PCBs but include a DC-DC switchmode LED driver on the board. Rated input voltage is 6 to 12V DC, LED current is fixed at 350mA, so these are ideal for LEDs 1 watt or...

These look like 20mm circular LED PCBs but include a DC-DC switchmode LED driver on the board. Rated input voltage is 6 to 12V DC, LED current is fixed at 700mA, so these are ideal for LEDs 3 watt or...

This little driver can handle input voltages in the range of 3.6 to 24V and boost the voltage to drive a string of 3 watt LEDs at 650mA current. Maximum output voltage is 42V, and you must have a...