Fasteners, hardware and other useful things

100mm long Davico brand black nylon cable ties in 2.5mm width (part number NTB20M), ideal for general cable bundling etc. Bag of 100 cable ties.

140mm long Davico brand black nylon cable ties in 3.6mm width (part number NTB30I), ideal for general cable bundling etc. Bag of 100 cable ties.

Nice simple plastic swivelling snaphook suitable for all sorts of task such as holding devices to keyrings etc. Made from a quite tough black plastic with a brass pivot on the snaphook. These are the...

The S-biner is one of the best general purpose clip/carabiner designs around. This is a generic plastic version with stainless steel gate wire. They are a nice looking unit and seem quite solid. We...

Black nylon M2 (2mm) washers. 5mm OD, 2mm ID, 1mm thick (approx).

These match our 2mm screws. They are stainless steel and measure 5mm outside diameter and 0.3mm thick, with a 2.2mm hole. Price is per bag of 10.

These match our 2mm screws. They are stainless steel. Price is per bag of 10.

This kit consists of 180 pieces of M2 (2mm) A2 stainless steel Phillips pan head machine screws and 180 hex nuts. The kit contains 20 each of the following screw lengths: 4, 5, 6, 8, 10, 12, 14, 16...

These match our 2mm screws. They are stainless steel and measure 1mm thick before compression and 0.55mm thick once compressed, with a 2.2mm hole. Price is per bag of 10.

These are the same size as supplied with some of our LED heatsinks, such as the 90mm heatsink, just a little longer. They are 2mm diameter and the threaded section is 12mm long. They have a dome...

These are the same size as supplied with some of our LED heatsinks, such as the 90mm heatsink, just a lot longer. They are 2mm diameter and the threaded section is 20mm long. They have a dome "pan"...

These are the same size as supplied with some of our LED heatsinks, such as the 90mm heatsink, just a lot longer. They are 2mm diameter and the threaded section is 25mm long. They have a dome "pan"...

These are the same size as supplied with some of our LED heatsinks, such as the 90mm heatsink. They are 2mm diameter and the threaded section is 6mm long. They have a dome "pan" head that takes a...

These are the same size as supplied with some of our LED heatsinks, such as the 90mm heatsink, just a little longer. They are 2mm diameter and the threaded section is 8mm long. They have a dome "pan"...

Black nylon M2.5 (2.5mm) washers. 5mm OD, 2.5mm ID, 1mm thick (approx).

These match our 2.5mm screws and are ideal where you need insulation under the screw head, such as when mounting power LEDs. They are red fibre board material and measure 5.5mm outside diameter and...

These match our 2.5mm screws. They are stainless steel and measure 6mm outside diameter and 0.5mm thick, with a 2.7mm hole. Price is per bag of 10.

These match our 2.5mm screws. They are stainless steel. Price is per bag of 10.