Mini RGB LED controller PCB

This PCB has a COB IC and can be used to drive either common anode RGB LED strip or common anode RGB LEDs. It has a single fixed flashing sequence similar to the RGB fast flashing LEDs, so you can use it to turn any common anode RGB LED (or three separate LEDs if you wish) into an animated LED.

Supply voltage is 3.3 to 12V DC. The board has reverse polarity protection, but there is no current limiting on the LED outputs, so you must use either constant voltage LED strip or resistors on each leg of an RGB common anode LED.

Maximum current is unknown, but we estimate at least an amp in total.

Board measures 30mm x 10mm.