All Products

Nice 10mm diffuse LED with integrated constant current circuit. Draws around 14mA over a 5 to 20VDC range. No need for resistors, and these can be ... more info

These are 10mm superbright narrow angle LEDs prewired with a resistor and 150-250mm of flying leads, ready to be used on any DC voltage from 9 to 14 ... more info

Nice superbright bipolar LEDs that light up red or blue, depending on polarity. Made by Optosupply, part number is OSRBP2A132A.

Nice superbright bipolar LEDs that light up red or bright green (525nm), depending on polarity. Made by Optosupply, part number is OSRPP2A132A.

Nice superbright bipolar LEDs that light up red or yellow, depending on polarity. Made by Optosupply, part number is OSRYP2A132A.

Wide angle superbright RGB LEDs with an inbuilt controller that flashes between a range of colours. Has a 10mm white diffuse case. Rated 20mA with a ... more info

Wide angle superbright RGB LEDs with an inbuilt controller that slowly fades between a range of colours. Has a 10mm white diffuse case. Rated 20mA ... more info

Nice 10mm water clear LED with integrated constant current circuit. Draws around 14mA over a 5.5 to 20VDC range. No need for resistors, and these can ... more info

These coated rare earth magnets are 10mm diameter and 10mm thick, which gives them quite a bit of strength. They are ideal for all sorts of uses ... more info

These magnets 10mm diameter and 2.5mm to 3mm thick. They are strong for their size and have a 3mm diameter countersunk hole in the middle, so that ... more info

These coated rare earth magnets are 10mm long, 5mm wide and 5mm thick, and they have good strength for their size. They are ideal for all sorts of ... more info

Nice 10mm diffuse LED with integrated constant current circuit. Draws around 14mA over a 5 to 20VDC range. No need for resistors, and these can be ... more info