All Products

These are 4.8mm superbright red (630nm) LEDs prewired with a resistor and 200-250mm of flying leads, ready to be used on any DC voltage from 9 to 14 ... more info

These tiny LEDs are around 1.6 x 1.5mm in size and have both red and warm white LED chips, controlled independently (no common electrode). Ideal for ... more info

These superbright red LEDs have the 2mm short "tower" case (the nipple is slightly larger and longer than the 1.8mm LEDs) and have a red diffuse ... more info

Miniature red diffuse superbright LEDs in a standard 2mm tower case. Ideal for models, illumination through panels etc. Specifications Wavelength: ... more info

These nice LEDs have a triangular cross section (they measure 5.35mm each side and are 7mm long) and glow nice and bright at their rated current of ... more info

These great little LEDs are made by Nichia Corporation. They measure 4.5x2mm and have a tinted diffuse case. The nice domed end gives them a wide ... more info

Superbright red LEDs ideal for anywhere a compact LED is required. These are 0603 (1.5mm x 0.75mm) case and are extremely small. You will need good ... more info

These superbright red LEDs have the 1.8mm short "tower" case and have a water clear case. A very compact light source for models etc. Specs are ... more info

Superbright red LEDs ideal for anywhere a compact LED is required. These are 1206 (3 x 1.5mm) case. You will need good SMD skills to work with these! ... more info

Superbright red LEDs ideal for anywhere a compact LED is required. Specifications Size: 3528 (1210), ie 3.5mm x 2.8mm x 1.9mm Colour: 620nm - 625nm ... more info

These are superbright red LEDs with a short flangeless waterclear case. They measure 3mm diameter x 4.1mm long, so are one of the smallest ... more info

These use a standard 3528 case, but instead of having the flat electrodes wrapped around each end of the case, they stick out from the ends. This ... more info