All Products

This kit allows you to put together a simple LED light which is powered by 3 x AA batteries and will run continuously for around a year. Developed by ... more info

Standard fast blow M205 (5mm x 20mm) fuses with a 1.25A (500mA) rating.

These are a 5mm 8,400mcd, 470nm blue LED with an attached 1.5 volt booster circuit. They will run from any voltage between 0.8 to 1.6V DC, making ... more info

These are a 5mm RGB fast animating LEDs with an attached 1.5 volt booster circuit and short flying leads. They will run from any voltage between 0.8 ... more info

These are a 5mm 20,000 mcd 3000K white LED with an attached 1.5 volt booster circuit. They will run from any voltage between 0.8 to 1.6V DC, making ... more info

This optic fibre works like a light collecting light pipe. Light that falls on the sides of the fibre enters, is trapped and reflected to each end, ... more info

1.6 ohm, 0.6 watt metal film resistors in a 0.25 watt size. Made in Germany by BCcomponents. Price is per resistor.

1.8 ohm, 0.6 watt metal film resistors in a 0.25 watt size. Made in Germany by BCcomponents. Price is per resistor.

These are high grade resistors rated at 0.6 watt (same body size as a typical ¼W resistor, Ø2.4x6.3mm). Ideal for current limiting in LEDs and ... more info

10 pin resistor networks with five independent 220 ohm resistors inside. Ideal where you need multiple resistors of the same value. Standard 10 pin ... more info

These nice bargraph displays are standard 10 segment units with good brightness. They have 10 individual LEDs and 20 pins, so no common electrodes to ... more info

This unusual display has 9 green fan blades around a yellow centre. Each segment is individually addressable, so you can easily make a rotating fan ... more info