All Products

Tiny SOP14 case SMD ICs that will drive up to eight LEDs in a sequence to simulate a flickering flame. See the video for details. Just apply power, ... more info

This simple little kit uses an LM358 IC to make eight blue LEDs "breathe" - they ramp up and down rather than flashing on and off. There is a trimpot ... more info

Tiny SOT23-5 case SMD ICs that will drive a common anode RGB LED (or three individual LEDs) to produce different colours and animations. Mode is ... more info

These nice little green fibreglass PCBs have rows of pads on each side, making them more robust than single sided boards. Ideal for making small LED ... more info

These great displays are an array of 8 x 32 addressable (WS2812 standard) RGB pixels. They measure 80mm x 320mm and have 5050 RGB LEDs. Each array ... more info

These buck drivers operate from 8 to 25V DC (they have input polarity protection) and will output up to 3A. They have an onboard trimpot to set the ... more info

This constant current LED driver is made for 10 watt LEDs. It is ideal for powering 10W LEDs or LED arrays from cars, solar or other battery systems, ... more info

These tiny heatsinks measure just 8.8mm square and 5mm high. They are finished in black anodising for good heat radiation and come with thermal tape ... more info

This kit consists of a 6 inch long x 1 inch high backlight module, along with a PCB that mounts to the back of the module and contains a MM5451 LED ... more info

Ideal where you need a high current bridge rectifier for power supplies, polarity protection etc. Made by Diotec Semiconductor, part number GBV15K. ... more info

Small general purpose bridge rectifier rated at 800V, 2A. Ideal for all sorts of projects and power rectification, or where you need to ensure a ... more info

These amazing filaments are very flexible and contain many LEDs connected in parallel, so require only 3V to operate. We still recommend you limit ... more info