All Products

2 position socket for the Dupont terminated wires in this category. Spacing is standard 2.54mm, datasheet is here. Can also be used as a LED spacer ... more info

3 position socket for the Dupont terminated wires in this category. Spacing is standard 2.54mm, datasheet is here. Can also be used as a LED spacer ... more info

4 position socket for the Dupont terminated wires in this category. Spacing is standard 2.54mm, datasheet is here. Can also be used as a LED spacer ... more info

The female socket and approximately 190mm of twin core lead as supplied on the EL kit inverters. Use these to replace a damaged socket, or for making ... more info

The male plug and approximately 190mm of twin core lead as supplied on the EL kit wires and panels. Use these to replace a damaged plug, or for ... more info

These are one of the most common optoisolators, consisting of a simple LED and phototransistor pair. They feature 5kV of isolation, and either open ... more info

This excellent tape has adhesive on one side and if very conductive at just a few ohms per metre (depending on width). Tape is 10mm wide and 0.1mm ... more info

This simple kit uses one IC to alternately flash two pair of LEDs, much like the flashing lights on emergency vehicles. The kit runs from 9V to 12V ... more info

These are water clear 3mm LEDs that light up a very bright red. They are supposedly made by Everlight but have the same part number as the Agilent ... more info

These are great little 5mm white LEDs from Everlight. They are rated at 11,250mcd maximum at a 15 degree beam angle. The interesting thing about them ... more info

These are great little 5mm white LEDs from Everlight Electronics. They are rated 4500mcd minimum, 9000mcd maximum, at a 30 degree beam angle. They ... more info

These are Everlight part number SIR333 875nm infrared LEDs. Rated output is 20mW/Sr with a 20 degree viewing angle. We currently have N rank (11 to ... more info