Optosupply/Truopto

Nice 470nm blue LEDs with tinted diffuse case for general indication. Rated at 220mcd at 20mA current. These are medium brightness LEDs, suitable for general purpose indicators etc. These are...

Nice 605nm orange LEDs with tinted diffuse case for general indication. Rated at 220mcd at 20mA current. These close to superbright LEDs, so make for quite visible indicators etc. These are...

Nice superbright warm white LEDs with diffuse case for general indication and illumination. Rated current 20mA. Note that the datasheet lists them as 10,000mcd typical at 30 degree viewing angle, but...

Nice 470nm blue LEDs with water clear case. Rated at 4200 to 5800mcd at 20mA current at a 30 degree viewing angle, but we think these ratings are very conservative, these LEDs are very bright. These...

Nice bipolar 234 sized waterclear LEDs from Optosupply. They light superbright blue one way, or superbright pink with reverse polarity. These are perfect for general illumination, models and anywhere...

These amber superflux LEDs are made by Optosupply and are designed for automotive and architectural lighting, but are ideal whenever you need a very bright yellow/amber (590nm) wide angle LED. They...

These are bright 0603 (1.6 x 0.8mm) LEDs with a violet output. They are rated at 180-280mcd with a 120° viewing angle.

These are a 5mm 8,400mcd, 470nm blue LED with an attached 1.5 volt booster circuit. They will run from any voltage between 0.8 to 1.6V DC, making them ideal for use with 1.2 and 1.5V batteries. The...

These are a 5mm RGB fast animating LEDs with an attached 1.5 volt booster circuit and short flying leads. They will run from any voltage between 0.8 to 1.6V DC, making them ideal for use with 1.2 and...

Nice 10mm water clear LED with integrated constant current circuit. Draws around 14mA over a 5.5 to 20VDC range. No need for resistors, and these can be used as the current control device in a string...

Nice 10mm diffuse LED with integrated constant current circuit. Draws around 14mA over a 5.5 to 20VDC range. No need for resistors, and these can be used as the current control device in a string of...

Bright red-orange flashing LEDs in a standard 10mm water clear case. Rated at 1560mcd at 30° viewing angle, rated wavelength is 625nm. Made by Optosupply, part number OSHR0X31A, datasheet is here.

Nice 10mm water clear LED with integrated constant current circuit. Draws around 14mA over a 5.5 to 20VDC range. No need for resistors, and these can be used as the current control device in a string...

Nice 10mm water clear LED with integrated constant current circuit. Draws around 14mA over a 5.5 to 20VDC range. No need for resistors, and these can be used as the current control device in a string...

Nice 10mm water clear LED with integrated constant current circuit. Draws around 14mA over a 5.5 to 20VDC range. No need for resistors, and these can be used as the current control device in a string...

Nice 10mm water clear LED with integrated constant current circuit. Draws around 14mA over a 5.5 to 20VDC range. No need for resistors, and these can be used as the current control device in a string...

Nice superbright bipolar LEDs that light up red or blue, depending on polarity. Made by Optosupply, part number is OSRBP2A132A.

Nice superbright bipolar LEDs that light up red or bright green (525nm), depending on polarity. Made by Optosupply, part number is OSRPP2A132A.