Mini RGB USB LED light with voice control

These nice little lights consist of a PCB with two 5050 RGB LEDs (one each side) and a microphone and controller IC. They have a standard USB type A plug - just plug them into a USB socket and you have light.

The light is unusual in that the controller is voice controlled. Simply speak the commands clearly and it will do what you ask. Commands/modes are:

• "Turn on the light" will turn the lamp on when off.
• "Switch off the light" will turn off the light when on. Also use this to reset the mode when in music mode.
• "Brighten the light" increases the dimming level - when the maximum brightness is reached, the LEDs will flash briefly.
• "Dim the light" decreases the dimming level - when the minimum brightness is reached, the LEDs will flash briefly.
• "Change the colour" will change the colour. Colours will cycle through red, green, blue, purple, cyan, white and colour animating mode (slow continual colour change).
• "Music mode" puts the lamp into an audio responsive mode so it will flash different colours to music or other sounds. Turn off the light to reset this mode.

Note: unit does not have dimming level memory when power is removed, only when switched off by voice command.

Makes a great eye-catching light with a unique control method. It should keep the kids amused for at least 10 minutes!