Circular panel mount snap-in DC voltmeter - green

These nice little meters will measure any voltage range from 4 to 100V DC. They are simply to fit, just drill a 30mm hole and snap them into place.

The meter draws power from the voltage being measured, but is a low energy consumer. Input impedance is typically >100k and working current is less than 15mA. The meter has reverse polarity protection.

Ideal for adding a voltmeter to any automotive electrical system or 12 or 24 volt solar system. The uses are endless really.

Meter face measures 33.8mm diameter and total depth of the meter is 18mm. Comes with 200mm long plug-in leads.

Specifications
Input voltage: 4-100V
Minimum start voltage: 3.8V
Working current: red <15mA, green <12mA, blue <12mA
Permissible error: ±1%
Input impedance: >100k ohms
Refresh rate: approx.. 300ms
Operating temperature: -10°C - 65°C
Size: 33.8mm diameter x 18mm thick
Mounting hole size: 30mm