Warm white 12 volt 5050 LED ribbon - double row

This consists of an 20mm wide flexible plastic/metal composite ribbon that has superbright warm white 5050 LEDs soldered to it every 16.7mm or so, in two parallel rows, for a total of 600 LEDs per 5 metre roll. They are connected as groups of three in series with a tiny surface mount resistor, and the ribbon can simply be cut with scissors to the desired length. It has double sided tape on the back of the ribbon for mounting to a flat surface.

The ribbon is designed to run from 12 volts DC, each 6-LED section is a separate 12 volt light strip, so you can cut it up into sections and each section still runs from 12 volt DC.

Price is per full 5 metre roll. Current consumption is 2.4A per metre, or 12A per roll. Light output is around 2000 lumens per metre, colour temp is around 3000K.

Note: You will need reasonable soldering skills to solder to this material as the solder pads are quite small. This material is sometimes provided on the same flexible PCB as used for RGB ribbon. For full brightness, connect V+ to all three pads marked R, G and B.