All Products

These neat little enclosures are ideal when you need to safely enclose a small circuit board or connections or whatever. Outer size is around 61 x 36 ... more info

Mini neon lamp in standard neon orange colour. The size of these is 4.2mm diameter x 11mm long with 25mm lead-free leads. Must be used with a current ... more info

These 0.36" voltmeters can measure up to 50VDC as they have a separate power supply wire and a common ground. You can use them in two ways: If you ... more info

These little boards will dim LED strip or other constant voltage LED products from 1% up to 99% brightness. They can also be used to control the ... more info

This PCB has a COB IC and can be used to drive either common anode RGB LED strip or common anode RGB LEDs. It has a single fixed flashing sequence ... more info

These nice little lights consist of a PCB with four 5050 RGB LEDs and a tact switch and controller IC. There are USB contacts on both sides and the ... more info

These nice little lights consist of a PCB with two 5050 RGB LEDs (one each side) and a microphone and controller IC. They have a standard USB type A ... more info

These ALPS brand switches measure 5mm square x 9.5mm tall, including the 2mm button, but not including the pins. They are part number SKELAK010 but ... more info

Very nice little switches from C&K, single pole, three positions (centre pin is common). Part number is OS103011MS8QP1, datasheet is here.

Standard lever-type microswitches similar to those used in mice etc. Rated at 2A at 125VAC, they measure 12.8 x 5.7 x 6.5mm, not including lever and ... more info

These single pole rockers are great for all manner of projects, including turning LEDs on and off. Rated at a big 6 amps at 125VAC. These are smaller ... more info

These simple lights consist of a PCB with 3 LEDs and a resistor. There are USB contacts on one side, so just plug them into a USB socket and you have ... more info