All Products

PCB mount holder for standard blade fuses.

These neat little sockets are made by Vcc and allow you to swap out low power LEDs any time you wish without soldering. Solder the socket to the ... more info

Neat little rectangular yellow LED with a reduced width end for use as a panel indicator. Philips brand, part number CQV62. Specs are below: Peak ... more info

Bright red clear lens LED has a 5mm waterclear case. Vf is around 1.7V, Imax is 20mA. Wavelength is 650nm and viewing angle is 20 degrees. These ... more info

These are very bright ice blue (very light blue, like a very cool white, but nicer) LEDs that produce their light using the same system as white LEDs ... more info

These are very bright yellow LEDs that produce their light using the same system as white LEDs - using a phosphor. These are very much a yellow LED, ... more info

These are very bright lime green LEDs that produce their light using the same system as white LEDs - using a phosphor. Specs: Vf = 3.2V, If = 20mA ... more info

These are very bright violet LEDs that produce their light using the same system as white LEDs - using a phosphor. Output is a light violet colour ... more info

These LEDs are rated up to 0.5W (150mA) and have phosphor throughout the top half of the case, so they spread the light very evenly. They are similar ... more info

This consists of an 10mm wide flexible plastic/metal composite ribbon that has superbright pink 5050 LEDs soldered to it every 16.67mm, for a total ... more info

These are 4.8mm superbright pink LEDs prewired with a resistor and 200-250mm of flying leads, ready to be used on any DC voltage from 9 to 14 volts. ... more info

Superbright pink LEDs ideal for anywhere a compact LED is required. Specifications Size: 3528 (1210), ie 3.5mm x 2.8mm x 1.9mm Colour: bright pink ... more info