All Products

These forceps measure around 165mm total length with a straight non-serrated tip. They are made from stainless steel and have a locking system in the ... more info

These tweezers measure around 163mm total length with a narrow angled tip. They are made from stainless steel and have a sliding locking system. They ... more info

These metal PCBs suit generic "Luxeon copy" style LEDs as well as original Luxeons and many other round bodied power LEDs. They are the standard 20mm ... more info

These fans measure 60mm square x 25mm thick. They are rated at 12VDC, 0.06A (around 0.77 watt). Rated speed is 3100rpm, airflow is 16cfm (450L/m) at ... more info

These fans measure 80mm square x 15mm thick. They are rated at 12VDC, 0.163A (around 1.96 watt). Rated speed is 3000rpm, airflow is 37cfm (1305L/m) ... more info

This big glass (not plastic, like some cheap ones) crystal is 12cm long by 2.8cm wide and 1.5cm thick and works like a prism. However, it is coated ... more info

These amber (590nm) superflux LEDs feature a wide beam angle and have a 3mm dome lens. Standard superflux case, but note that the chamfer on the case ... more info

These green (525nm) superflux LEDs feature a wide beam angle and have a 5mm dome lens. Standard superflux case, the chamfer on the case denotes the ... more info

Nice superbright warm to neutral white (3500-4000k) 2mm tower LED with a water clear 2mm tower case.

These nice enclosures are ideal when you need to safely enclose a larger circuit board or for housing instruments and devices using screens and ... more info

These nice enclosures are ideal when you need to safely enclose a smaller circuit board or for electronics projects which have a speaker, as they ... more info

These great little chips will flash 3 LEDs in sequence, followed by a short pause. Use it to flash one LED at a slow rate, or up to 3 in sequence. ... more info