All Products

These are water clear 3mm LEDs are different to regular 3mm LEDs in that they have a flat end, not domed, and have a very wide viewing angle of ... more info

A bag of 1000 superbright 400nm UV 3mm LEDs in standard waterclear case. Long leads (27mm anode, 25mm cathode, approx). Vf is 3.2-3.4V, drive current ... more info

These look like 3mm standard water clear LEDs but actually have a breathing controller built into them, so they fade up and down between off and full ... more info

These are water clear 3mm LEDs that light up a very bright red. They are different to regular 3mm LEDs in that they have a flat end, not domed, and ... more info

These are the LEDs you see in the flickering flame imitation candles so popular nowadays. They contain a red (625nm) LED and an IC that changes the ... more info

A bag of 1000 superbright red (625nm) 3mm LEDs in standard waterclear case. Long leads (27mm anode, 25mm cathode, approx). Vf is 1.9-2.1V, drive ... more info

Superbright red tinted diffuse LEDs in a standard 3mm case. Specifications Wavelength: 620-625nm Intensity: 600-800mcd Viewing angle: 80° Lead ... more info

These LEDs have red and blue chips and a flashing controller IC which alternated between the colours. The LEDs change colour at around a 2Hz rate, so ... more info

This is a 3mm bicolour LED for general indication and other purposes. These LEDs have a standard 3mm body with two leads, but contain two LEDs ... more info

These are 3mm superbright LEDs prewired with a resistor and 150-250mm of flying leads, ready to be used on any DC voltage from 5 to 12 volts. They ... more info

This is a 3mm bicolour LED for general indication and other purposes. These LEDs have a standard 3mm body with two leads, but contain two LEDs ... more info

These have a standard 3mm waterclear case and light up white in one direction, and red when you reverse polarity. Both chips are superbright and ... more info