All Products

This is the bare PCB for our Forever Flasher kit. This simple kit uses one IC to flash a pair of LEDs at a low level using an extremely low average ... more info

Quality superbright blue LEDs ideal for anywhere a compact LED is required. Made by Foryard, part number FYLS-3528NUBC. Datasheet is here.

These use a standard 3528 case, but instead of having the flat electrodes wrapped around each end of the case, they stick out from the ends. This ... more info

These nice LEDs have a triangular cross section (they measure 5.35mm each side and are 7mm long) and glow nice and bright at their rated current of ... more info

These LEDs are rated up to 0.5W (150mA) and have phosphor throughout the top half of the case, so they spread the light very evenly. They are similar ... more info

This consists of an 10mm wide flexible plastic/metal composite ribbon that has superbright green 5050 LEDs soldered to it every 16.67mm, for a total ... more info

These are standard brightness 3mm green LEDs with a diffuse green tinted case. I don't have specs on these, but they are manufactured by Rohm, part ... more info

These are standard brightness 3mm green LEDs with a diffuse green tinted case and leads preformed into a 90 degree bend. I don't have specs on these, ... more info

These are 4.8mm superbright green (525nm) LEDs prewired with a resistor and 200-250mm of flying leads, ready to be used on any DC voltage from 9 to ... more info

These are standard brightness 5mm green (570nm) LEDs with a wide viewing angle and a diffuse green tinted case. Basic ratings are 10mcd @ 20mA with a ... more info

These are the same size as normal NE2 neons (commonly found in nightlights etc) but they glow green, not the standard orange colour! Like all neons, ... more info

Miniature green (560nm) diffuse standard brightness LEDs in a standard 2mm tower case. Ideal for models, illumination through panels etc. ... more info